High-end button production process
Small buttons, complicated processes, if only to be shaped, as long as there is a machine, there are raw materials, the mold will be a continuous source of energy to produce embryos, but that is far from meeting the needs of customers . A well-crafted button can be intuitively reflected in color, texture, and weight. Imagine a button with a gray face and a quilt stitch on a fine casual shirt. So the exquisite products must go through a series of supporting follow-up processes to make the buttons more “on the mirrorâ€. Polishing - The process of cutting the surface of a metal part by means of the rotation of a specially-ground grinding wheel (or belt) with abrasives. Grinding can remove parts of the surface of the burr, rust, scratches, welds, welds, sand holes, oxide skin and other macro defects, in order to improve the flatness of the parts and plating quality. Electroplating - A method of plating a conductor with a layer of metal using the principle of electrolysis. By electrolysis, the pre-plating cations in the plating solution are deposited on the surface of the base metal to form a surface processing method of the plating layer. The buttons use hanging electroplating process, making the surface very bright. After the truss, oil spray, spray paint and so on. It can be said that a seemingly simple metal button, in fact, the entire production process is very complicated, and to ensure that each of them can not be flawed, otherwise the button can only be scrapped. The high-end buttons not only make the craft complicated, but also have to be transported after the finished product. The packaging is also very particular. Ordinary roll buttons, only need a large plastic bag, then hot seal, with a tape, they can send out. However, high-end buttons cannot be used because they need to be kept apart because they prevent the buttons from colliding with each other. In the past, the more commonly used packaging was to pack each metal button individually with paper. Now, the more commonly used packaging method in the past few years has been to use plastic trays. The buttons are arranged in transparent plastic trays. Inside, a transparent plastic film is applied on the top so that the packaging is more intuitive, more convenient and beautiful. This kind of packing method can also play a good role in buffering, avoiding collision of worn buttons during transportation. Other metal products, such as Newton, pull cards, rivets, and brooches, are also packaged in different ways. Although it sounds tedious, these steps are indispensable for maximizing product quality. Want to learn more about buttons: accessible For more details, please pay attention to WeChat public number: Hair Jewelry Hair Jewelry,hair clip,Hair jewelry for women,hair clip for women, women hair jewlry JOYA GIFT CO.,LIMITED , https://www.joyagifts.com