More than ten national design colleges "avant-garde technology equipment" voted on the beach 3D printing + laser cutting

Recently, the 20th Annual Meeting of the International Fashion Institutes Association (IFFTI), which was formed by the New York Fashion Institute, the London Fashion Institute, the Japanese Chemical College, and the French Fashion Institute, was unveiled at Donghua University, from 12 countries and regions. The 25 design institutes selected nearly 300 entries to make the annual conference design competition a new high. In the end, 47 national players won the finals, including 3D printing, laser cutting, thermal temperature fabrics, wearable devices and other "avant-garde technology equipment", all of which played the popular theme of "Arts Fusion".

“This is the fashion of 3D printing,” designer Yuan Guoxiang introduced an all-white “mesh shirt” selected by Singaporean universities. Its shoulders and crotch parts are very complicated, such as honeycombs and sea anemones. , showing the irreplaceability of 3D printing in clothing styling. However, it is not difficult to observe that the inner layer of this fashion work is lined with gauze underwear. "Otherwise, it will be a little twisted when you walk." Sometimes, a hug will leave a colored mark on the clothes, making the clothes full. Interesting. At the same time, in the research application, it is used to make athletes' clothing, which can display and test the body temperature changes brought by the movement state in real time.

White 3D printing is the 23rd item of the finalist. As one of the organisers of the event, Yuan Guoxiang, an associate professor at the School of Fashion and Art Design of Donghua University, told the Liberation Daily and Shangguan journalists that 3D printing technology was introduced into the design of clothing. Only by computer modeling, any structural weaving can be realized. The need for textile machinery, hand-stitching, etc., has changed the traditional pattern of ready-to-wear. He also said that in the past, the material of 3D printed clothing was still relatively hard, and now it is softer and the wearability is improved.

There is more than one 3D print fashion. Work No. 18, selected by Australian institutions. Its main 3D printing component lies in the "neck dressing", which is similar to the scarf and the bib. It is a bit like a layer of plant leaves stacked, which is like a broken piece, and the ring is clothed between the necks. But in the eyes of the inside, this piece of dress and dress, the more "technical" is also the laser cutting.

Originally, the designer used laser cutting techniques on leather fabrics, leaving countless horizontal cuts. However, these "knifes" with a length of ten millimeters are uniform in length and arranged. The effect of this formation is like the Chinese “drawing flower” technique, which presents a “breathable structure” on the surface of the garment, and can be naturally opened and closed with the clothing swaying.

The same laser surface treatment expert, Dr. Yuan Guoxiang said that the advantage of laser cutting is precisely, efficient and environmentally friendly. The laser processing of this garment takes only 15 to 20 minutes. In other cases, the laser can handle the thickness of the fabric, such as the various "old" effects on the surface of denim, and can replace the pollution means such as printing and dyeing with laser. It is reported that Donghua University will take the lead in launching 7 environmental protection standards of China Textile Industry Federation this year. This is the first time at home and abroad to regulate and guide the whole life cycle of fashion product development and consumption.

Regarding the relationship between art, technology and fashion, Wu Haiyan, a member of the Design Discipline Review Group of the Academic Degrees Committee of the State Council and the dean of the School of Design and Art at the China Academy of Art, believes that “culture and art are creative because they condense the extreme sensitivity and supreme aesthetics of human development of social things. The original gene is therefore an irreplaceable foundation and connotation in fashion." Therefore, she defines art + technology design as "art" works, which is understood as "culture evolution."

Taking fashion as the medium and technology as the wing, perhaps technology can only bring artistic aesthetics in creativity. As one of the only executive members and early members of the International Fashion Institute Alliance in mainland China, Donghua University and the Japanese design school jointly cultivate students to bring "discoloration clothing." For example, the No. 16 work, which looks like a suit-style black fur top, uses a "hot temperature" material on its surface.

Do not believe that you can try it on the spot: press the fabric directly with your thumb, the thumb print will turn white instantly; the hands are hot, and then press the surface of the clothes, the entire handprint is white or even yellow. In fact, this functional material varies in color depending on the contact temperature. Sometimes, a hug will leave a colored imprint on the clothes, making the dress full of fun. At the same time, in the research application, it is used to make athletes' clothing, which can display and test the body temperature changes brought by the movement state in real time.

Some of the final works are more functional, and that is the "charger" represented by the 20th work. It uses a multi-bag design, such as left and right armpits, with rectangular pockets, which can be used to place smart phones and tablet-type charging treasures; the hem also has a large transparent pocket, which is covered with more than a dozen raised 5 The battery shape; its two-sleeve cuffs, also comes with several charging lines for different mobile phone models, which form a knot decoration effect, and can also be charged. The judges believe that the garments selected by the Hong Kong Polytechnic University strive to find a balance between practicality and aesthetics.

Editor in charge: null